Skip to main content

LATEST MECHANICAL INVENTION


Robotic device has therapeutic potential for ankles and feet

A soft, wearable device that mimics the muscles, tendons and ligaments of the lower leg could aid in the rehabilitation of patients with ankle-foot disorders.

This is the claim of Yong-Lae Park, an assistant professor of robotics at Carnegie Mellon University. He worked with collaborators at Harvard University, the University of Southern California, MIT and Massachusetts-based BioSensics to develop an active orthotic (artificial support or brace) device using soft plastics and composite materials instead of a rigid exoskeleton.

The soft materials - combined with pneumatic artificial muscles (PAMs), lightweight sensors, and advanced control software - made it possible for the robotic device to achieve natural motions in the ankle.

The researchers reported on the development in the journal Bioinspiration & Biomimetics. In a statement, Park said the same approach could be used to create rehabilitative devices for other joints of the body or create soft exoskeletons that increase the strength of the wearer.

The robotic device would be suitable for aiding people with neuromuscular disorders of the foot and ankle associated with cerebral palsy, amyotrophic lateral sclerosis, multiple sclerosis or stroke. These gait disorders include drop foot, in which the forefoot drops because of weakness or paralysis, and equinus, in which the upward bending motion of the ankle is limited. Conventional passive ankle braces can improve gait, but long-term use can lead to muscle atrophy because of disuse. Active, powered devices can improve function and also help re-educate the neuromuscular system.

‘The limitation of a traditional exoskeleton is that it limits the natural degrees of freedom of the body,’ said Park. The ankle is naturally capable of a complicated three-dimensional motion, but most rigid exoskeletons allow only a single pivot point. The soft orthotic device enabled the researchers to mimic the biological structure of the lower leg. The device’s artificial tendons were attached to four PAMs, which correspond with three muscles in the foreleg and one in the back that control ankle motion. The prototype was capable of generating an ankle range of sagittal motion of 27 degrees, which is sufficient for a normal walking gait.

The soft device, however, is more difficult to control than a rigid exoskeleton. Park said it required more sophisticated sensing to track the position of the ankle and foot, and a more intelligent scheme for controlling foot motion. The device contains sensors made of a touch-sensitive artificial skin, and thin rubber sheets that contain long microchannels filled with a liquid metal alloy. When these rubber sheets are stretched or pressed, the shapes of the microchannels change, which cause changes in the electrical resistance of the alloy. These sensors were positioned on the top and at the side of the ankle.

Park said additional work will be necessary to improve the wearability of the device. This includes artificial muscles that are less bulky than the commercially produced PAMs used in this project.
Labels:

Comments

Post a Comment

Popular posts from this blog

Common Rail Type Fuel Injection System

  Electronic control common rail type fuel injection system drives an integrated fuel pump at an ultrahigh pressure to distribute fuel to each injector per cylinder through a common rail.   This enables optimum combustion to generate big horsepower, and reduce PM* (diesel plume) and fuel consumption. Bosch will supply the complete common-rail injection system for the high-performance 12-cylinder engine introduced by Peugeot Sport for its latest racing car. The system comprises high-pressure pumps, a fuel rail shared by all cylinders (i.e. a common rail), piezo in-line injectors, and the central control unit which compiles and processes all relevant sensor data.
Post a Comment
Read more

Turbocharger

  A turbocharger is actually a type of supercharger. Originally, the turbocharger was called a "turbo super charger." Obviously, the name was shortened out of convenience. A turbocharger’s purpose is to compress the oxygen entering a car’s engine, increasing the amount of oxygen that enters and thereby increasing the power output. Unlike the belt-driven supercharger that is normally thought of when one hears the word "supercharger," the turbocharger is powered by the car’s own exhaust gases. In other words, a turbocharger takes a by-product of the engine that would otherwise be useless, and uses it to increase the car’s horsepower. Cars without a turbocharger or supercharger are called normally aspirated . Normally aspirated cars draw air into the engine through an air filter; the air then passes through a meter, which monitors and regulates the amount of air that enters the system. The air is then delivered to the engine’s comb
Post a Comment
Read more

Different types of Casting Process

1) Investment casting 2) Permanent mold casting 3) Centrifugal casting 4) Continuous casting 5) Sand casting Investment casting Investment casting (known as lost-wax casting in art) is a process that has been practiced for thousands of years, with lost wax process being one of the oldest known metal forming techniques. From 5000 years ago, when bees wax formed the pattern, to today’s high technology waxes, refractory materials and specialist alloys, the castings ensure high quality components are produced with the key benefits of accuracy, repeatability, versatility and integrity. Investment casting derives its name from the fact that the pattern is invested, or surrounded, with a refractory material. The wax patterns require extreme care for they are not strong enough to withstand forces encountered during the mold making. One advantage of investment casting it that the wax can be reused. The process is suitable for repeatable
Post a Comment
Read more